Welcome to visit Kidney Fern!
Current location:front page >> mechanical

What are the dangers of mixing engine oil

2025-10-01 08:19:30 mechanical

What are the dangers of mixing engine oil

In car maintenance, the selection and use of engine oil is crucial. However, many car owners may mix different brands, models or grades of engine oil to save costs or seek convenience. This practice seems harmless, but it actually poses many risks. This article will combine popular topics and hot contents across the network for the past 10 days to deeply analyze the hazards of mixed use of engine oil and provide structured data for reference.

1. Common scenarios of hybrid use of engine oil

According to the discussion data on the entire network platform, the following are common situations for car owners to use engine oil mixed:

What are the dangers of mixing engine oil

adoProportionmain reasonweekly
Scene
Different brands of engine oil mix45%Promotional activities, inadequate inventory
Mix different viscosity grades30%Lack of expertise
Mix new oil with old oil20%Replace the oil completely when replenishing the engine oil
Mix synthetic oil with mineral oil5%Temporary emergency use

The hazards of mixed use of 2 Yi and engine oil

1. Lubrication performance deteriorates

The additive formula of different engine oils is unknown and has different composition ratios. After mixing, it may lead to chemical reactions and disrupt the formation of lubricating lubricating film. Data shows that the wear resistance of mixed engine oil is reduced by 15%-4320% on average.

2. Increased carbon deposits in the engine

Mixed engine oil is prone to colloidal precipitation, accelerating the formation of carbon deposits, especially in high temperature environments. The following are experimental data:

culesbera
Engine oil typeCarbon deposits (mg)Sludge rating
Single oil oil0.81.2
Mix engine oil1.53.8

3. The seal is damaged

The viscosity index regulators of different engine oils may conflict, resulting in an increase in the oleic acid value and accelerate the aging of the oil seal. The survey shows that the oil seal leakage rate of mixed oil vehicles is 2.3 times higher than that of normal vehicles.

4. Loss of warranty rights

86% of automakers clearly stipulate that engine failures caused by mixed oil use are not covered by warranty. This is particularly emphasized in the warranty terms of important luxury brands such as BBA.

3. Suggestions for correct use of engine oil

1. Strictly follow the engine oil standards specified in the vehicle manual

2. When replacing the engine oil, completely remove the old oil to avoid residual mixing.

3. Select the same brand and the same series of products

4. Different categories of engine oils (such as mineral differences) should not be mixed even if the viscosity is the same.

5. If mixed in special circumstances, products with the same type of base oil should be selected.

4. Expert warning

In its latest "Personal Vehicle Lubrication Guide", the China Society of Automobile Engineering specifically pointed out that oil mixing is a risky operation and may lead to irreversible engine damage. It is recommended that car owners establish a complete oil use file to avoid mixing different oil products.

Through the above analysis, it can be seen that mixing engine oils seems small but are actually of great importance. Car lovers should establish scientific maintenance concepts and never lose the big ones because of the small. Only by regular maintenance and standardizing oil use can we ensure that the engine is in the best working condition and extend the service life of the car.

Next article
  • What does water quality SS mean?In the field of environmental protection and water resources management, water quality SS is a common term, but many people may not know its specific meaning and its importance. This article will explain in detail the definition, measurement methods, influencing factors of water quality SS, as well as hot topics and hot content in the past 10 days, to help readers fully understand this
    2026-01-25 mechanical
  • What is self-oscillationSelf-excited oscillation is an important concept in physics and electronic engineering. It refers to the phenomenon that a system spontaneously generates and maintains periodic oscillations without external periodic excitation. This phenomenon occurs widely in nature and artificial systems, such as electronic circuits, mechanical systems, and biological rhythms. This article will combine the h
    2026-01-22 mechanical
  • What is an infrared imagerInfrared imager is a device that uses infrared radiation to detect and image. It is widely used in military, industrial, medical, security and other fields. It helps users observe and analyze in dark or low-visibility environments by capturing infrared radiation emitted by objects and converting it into visual images. This article will introduce in detail the principles, application scenario
    2026-01-20 mechanical
  • What line is UTP?In today's digital era, network communication technology is developing rapidly, and various cables play an important role as a medium for data transmission. Among them, UTP cable has become one of the hot topics due to its wide range of applications and excellent performance. This article will introduce the definition, characteristics, classification and application scenarios of UTP cables in detail,
    2026-01-18 mechanical
Recommended articles
Reading rankings
Friendly links
Dividing line